Bio-Rad iMark Microplate Absorbance Reader - Manual (Page 27)

iMark Microplate Absorbance Reader Instruction Manual
21
Memory Recall Operation
01 20/05/00 14:00
02»*21/05/00 17:00
03 20/05/00 18:00
↓04»■20/05/00 19:00
01»*20/05/00 09:00
02»
■20/05/00 10:00
Memory Recall
»
■Protocol
•Plate Data
Protocol type menu
Data type menu
End Point
Kinetic
End Point
Kinetic
Memory Recall Menu
Select protocol type
» ■End Point
•Kinetic
•Checkmark
Select Protocol #02
↑»■ *Protocol -2
! Protocol -3
↓ Protocol -4
Select Protocol #01
»
■ *Kinetic -1
! GALT
Select data type
» ■End Point
•Kinetic
•Checkmark
20/05/01 09:00
Checkmark
Checkmark program
has been activated.
Press any key
Checkmark
Selecting Protocol
Move the cursor to the position of the desired protocol and press Enter to
complete the selection.
NOTE: “
* ” indicates the currently activated protocol, and “ ! ” indicates a
security locked protocol.
There is no protocol selection with “Checkmark”.
When a protocol is selected, the system will then automatically return to the
MAIN screen.
Changing Current Active Protocol
Select “Protocol” in Memory Recall menu above, and press Enter. The Select
Protocol type
menu will appear on the screen.
Select a protocol using the Up and Down arrow keys. Press Enter to complete the
selection.
Selecting Plate Data
Move the cursor to the position of the desired plate data and press Enter to
complete the selection.
NOTE: “
* ” indicates the currently activated plate data.
There is only one storage for “Checkmark” data.
When plate data is selected, the system automatically returns to the MAIN
screen.
Changing Current Active Plate Data
Select “Plate Data” using the Memory Recall button and press Enter. The Data type
menu will appear.
Use the Up and Down arrow keys to select a plate data type. Press Enter to complete
the selection.
This menu screen can be accessed by pressing the Memory Recall key in the MAIN screen.