Bio-Rad iMark Microplate Absorbance Reader - Manual (Page 35)

iMark Microplate Absorbance Reader Instruction Manual
29
Standard Setting Procedure
Standard Curve Setting Menu
This menu screen is entered by choosing "STDs" in the End Point Protocol Menu screen. It is
used to set the concentration data and the curve fit type for a standard curve or to recall a
memorized standard curve.
The Up and Down arrow key moves the cursor to the desired item in the menu list. The Enter
key seals the selection and continues to the next setting screen.
a. STD Information Setting
STD Information
In this screen, there are three items for setting the concentration data of standards. The
Up and Down arrow keys move the cursor to the desired item in the menu list. The Enter
key seals the selection and continues to the next setting screen.
Number of Standards
The Numerical keys are used to enter the number of standards.
“0” means that the curve fit report is not used. The Enter key sets
the number and returns to the previous screen.
The maximum number of standards is 12.
Concentration
The Numerical keys and the Decimal point key are used to enter
the concentration values of standards. The Up and Down arrow
keys move the cursor to the desired position. The movement of the
cursor also follows the scroll of this screen. The Enter key sets all
values of the concentration of standards and returns to the previous
screen.
Unit
Seventeen units are supported. The unit marked with “[ ]” is the
current selection. The Up and Down arrow keys move the cursor to
the desired unit type. The movement of the cursor also follows the
scroll of this screen. Press Enter twice to select the unit type and to
return to the previous screen.
The supported types of unit are:
1. mol/l 11. pg/ml
2. m mol/l 12. U/ml
3. u mol/l 13. IU/ml
4. n mol/l 14. uIU/ml
5. p mol/l 15. mIU/ml
6. mg/l 16. EU
7. ng/l 17. Arbit.
8. pg/l
9. ug/dl
10. ng/ml
STD information
»
■Number of STD
•Concentration
•Unit
STD # 1: 0.512
STD # 2: 1.012
STD # 3: 1.512
↓ STD # 4: 2.053
Standard menu
»
■STD information
•Curve fit
•Recall STD curve
Concentration
Number of
STD
Number of STD
=
05 (0, 2–12)
↑»■ 01: ug/dl
02: ng/ml
03:[ pg/ml]
↓ 04: pm/ml Unit