Tractor requirements, Transport checklist, Typical nta907/3007hd drill weights – Great Plains NTA3007HD Operator Manual User Manual
Page 45: Tractor requirements transport checklist
Operating Instructions 41
04/04/2011
166-207M
Tractor Requirements
The figures in the table below represent a limited number
of configurations. The weight of your air drill can vary by
thousands of pounds, even if it is the same base model,
due to installed options and/or aftermarket equipment.
If your tractor weight or capability is near its limits, take
your empty air drill to a scale and get a precise weight.
Transport Checklist
❑ Plan the route. Avoid steep hills. Keep Clearances in
mind. Folded, your NTA907/3007HD Drill is just
under 4.1m (13.5ft) high and just under 3m (10ft)
wide.
❑ Hitch.
Make hydraulic, electrical and optional braking con-
nections. See “Hitching Tractor to Air Drill” on
page 18.
❑ Close hopper lids (page 45).
❑ Check that ladder (page 44), auger (page 53) and
markers (page 61) are stowed.
❑ If unfolded, raise, fold, tilt and hook air drill.
See “Folding the Air Drill” on page 34.
❑ If drill is equipped with optional brakes:
With tractor in Park, and with tractor parking brake
set, release drill parking brakes (page 42).
❑ Always have lights on for highway operation.
❑ Comply with all national, regional and local safety
laws when traveling on public roads.
❑ Release all brakes and travel with caution.
Typical NTA907/3007HD Drill Weights
Null4:
Null4:
29400
Material may be loaded prior to travel, but increases stopping
distance, increases the need for caution in turns and braking,
and increases tire and brake wear.
NTA907HD
NTA3007HD
NTA907HD
NTA3007HD
NTA907HD
NTA3007HD
-3610 (36 rows)
-4875 (48 rows)
-6006 (60 rows)
Base Drill Weight
9 851 kg
21,718 lb
10 749 kg
23,698 lb
11 648 kg
25,678 lb
606 kg
1,336 lb
808 kg
1,782 lb
1 010 kg
2,227 lb
Add for Auger
295 kg
650 lb
295 kg
650 lb
295 kg
650 lb
Add for Markers
655 kg
1,444 lb
655 kg
1,444 lb
655 kg
1,444 lb
Add for Brakes
101 kg
222 lb
101 kg
222 lb
101 kg
222 lb
Maximum Empty Drill
11 508 kg
25,371 lb
12 608 kg
27,797 lb
13 709 kg
30,222 lb
Add for Maximum Load
8 467 kg
18,667 lb
8 467 kg
18,667 lb
8 467 kg
18,667 lb
Maximum Loaded Drill
19 975 kg
44,038 lb
21 076 kg
46,464 lb
22 176 kg
48,889 lb
Add for Coulters