Great Plains NTA3007HD Operator Manual - Manual (Page 10)

6 NTA907HD or NTA3007HD
166-207M 04/04/2011
MetaData: End of
Safety Decals
Safety Reflectors and Decals
Your implement comes equipped with all lights, safety
reflectors and decals in place. They were designed to
help you safely operate your implement.
▲ Read and follow decal directions.
▲ Keep lights in operating condition.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
▲ When ordering new parts or components, also request cor-
responding safety decals.
To install new decals:
1. Clean the area on which the decal is to be placed.
2. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
Reflector: Slow Moving Vehicle (SMV)
on mainframe below fan;
1 total
See “Transport Safety Information” on page 40.
Null4:
Reflectors: Fluorescent Panels
panels: one each tongue draw bar,
panels and triangles: one each corner, rear mainframe;
4 panels and 2 triangles total
See “Transport Safety Information” on page 40.
Null4:
NTA907HD: n/a
(International models use
833-398C panels and
833-399C reflectors)
NTA3007HD: 818-055C
Null4:
29424
NTA907HD: 833-398C NTA3007HD: n/a
(North American models
use
818-055C SMV reflectors,
838-266C red reflectors &
838-267C amber reflectors.)
Reflectors: Red Triangle
NTA907HD: 833-399C NTA3007HD: n/a
(North American models
use
818-055C SMV reflectors,
838-266C red reflectors &
838-267C amber reflectors.)
Null4:
29428