Great Plains NTA3007HD Operator Manual - Manual (Page 145)

Options 141
04/04/2011 166-207M
Options
High Rate Flute Sets
The standard NTA907/3007HD Drill meters have two
fluted wheels (“stars”) and two filler rings in each active
meter compartment.
If your seeding rates need to be higher than those listed
in the Seed Rate manual, these accessories replace the
existing shaft assembly with one having more stars. See
“Changing Meter Flutes” on page 165 for installation
instructions.
Replacing the standard 2-star shafts with 3-star shafts
increases the seeding rate by approximately 50% (150%
of standard rate). Replacing standard 2-star shafts with
4-star shafts increases the seeding rate by approxi-
mately double (200% of standard rate).
The kit required depends on the number of stars desired.
Order one kit per meter (two per drill if changing both
meters)
Null4:
Markers
Hydraulically-operated markers leave a visible groove to
use as centerline for the next pass.
These dual markers mount on both sides, and include an
automatic sequence valve for operating alternate sides
on each bout/pass.
If ordered with a new NTA907/3007HD drill, markers are
factory-installed. They may also be ordered later for field
installation. Each kit equips one NTA907/3007HD drill.
Null4:
Stars per Outlet
Part
Numbers
3 Stars per outlet 168-401S
4 Stars per outlet 168-402S
Null4:
26335
Description Part Number
MARKER, NTA3007 & NTA907 113-826A
Null4:
29433