Wash water, Sealer setup (option), Wash water sealer setup (option) – Great Plains NP30A 30-foot Operator Manual User Manual
Page 46

42
NP30A or NP40A
Great Plains Manufacturing, Inc.
407-502M
2014-05-20
Wash Water
Refer to Figure 23
Empty the 10 gallon applicator First Aid Water tank. Refill
it with fresh clean water. If the nurse tank cart is at hand,
refill the nurse tank wash water as well.
The water needs to be changed daily. Water absorbs
ammonia vapor from the air, and becomes an
ammonium hydroxide solution over time.
When emptying wash tanks, use the time and water to
train operators on tank operations, and first aid rinsing
procedures.
Sealer Setup (Option)
As shipped from the factory, sealers are preset for
optimal shipping configuration. The factory default
settings are not likely to be suitable for your field
conditions.
Adjustments may also be required for different fields and
from season to season.
See “Sealer Adjustments” on page 97.
Figure 23
First Aid Water Station
31599