Owner assistance – Great Plains NP30A 30-foot Operator Manual User Manual
Page 24
20
NP30A or NP40A
Great Plains Manufacturing, Inc.
407-502M
2014-05-20
Owner Assistance
If you need customer service or repair parts, contact a
Great Plains dealer. They have trained personnel, repair
parts and equipment designed for Great Plains products.
Refer to Figure 3
Your machine’s parts were specially designed and
should only be replaced with Great Plains specified
parts. Always use the serial and model number when
ordering parts from your Great Plains dealer.
For 2013 and later 5-section applicators, the serial
number plate is located on the center section, on the
front face of the left front fold cylinder mount.
On 3-section applicators, and 2012 and earlier 5-section
models, the serial-number plate is located on the left face
of the top 3-point hitch weldment.
Record your NP30A or NP40A Fertilizer Applicator
model and serial number here for quick reference:
Model Number:__________________________
Serial Number: __________________________
Your Great Plains dealer wants you to be satisfied with
your new machine. If you do not understand any part of
this manual or are not satisfied with the service received,
please take the following actions.
1.
Discuss the matter with your dealership service
manager. Make sure they are aware of any problems
so they can assist you.
2.
If you are still unsatisfied, seek out the owner or
general manager of the dealership.
For further assistance write to:
Product Support
Great Plains Mfg. Inc., Service Department
PO Box 5060
Salina, KS 67402-5060
785-823-3276
Figure 2
2013+ 5-Section s/n Location
36030
M
# N
P4
0A
-25S
20
Figure 3
3S & 2012- 5S s/n Location
31057