Great Plains NTA3510 Installation Instructions - Manual (Page 29)

Great Plains Mfg., Inc.
Installation Instructions 29
10/29/2008 168-414M
Close-Out
Refer to Figure 67
37. Select all of:
464211090 DUST PLUG
Insert these at all unused row sensor leads on row
harnesses.
38. Select all remaining cable ties. Use them to further
secure all harnesses.
Check Operation
39. Hitch to suitable tractor.
40. Power-up seed monitor. Consult DICKEY-john Air
Cart Control operator manual and run Auto Configu-
ration.
41. Fold, unfold, raise and lower drill while checking that
hoses and sensor lines remain clear of moving
parts and retain some slack at all times.
42. Fold the drill. Move it to a suitable parking location.
Figure 67
Dust Plugs
28442
29
29
29