beautypg.com

Maintenance and lubrication, Maintenance, Maintenance and lubrication maintenance – Great Plains YP3025A Operator Manual User Manual

Page 98: Shear bolt replacement ( maintenance

background image

401-705M

Table of Contents

Index

02/16/2012

94

YP3025A

Table of Contents

Index

Great Plains Manufacturing, Inc.

Maintenance and Lubrication

Maintenance

Proper servicing and maintenance is the key to long
implement life. With careful and systematic inspection,
you can avoid costly maintenance, downtime, and repair.

Always turn off and remove the tractor key before making
any adjustments or performing any maintenance.

Crushing Hazard:
Always have transport locks in place and frame sufficiently
blocked up when working on implement. You may be severely
injured or killed by being crushed under the falling implement.

High Pressure Fluid Hazard:
Check all hydraulic lines and fittings before applying pressure.
Fluid escaping from a very small hole can be almost invisible.
Use paper or cardboard, not body parts, and wear heavy
gloves to check for suspected leaks. Escaping fluid under pres-
sure can have sufficient pressure to penetrate the skin. If an
accident occurs, seek immediate medical assistance from a
physician familiar with this type of injury.

1.

After using your planter for several hours, check all
bolts to be sure they are tight.

2.

Remove excess slack from chains. Clean and use
chain lube on all roller chains as needed.

3.

Maintain proper air pressure in planter tires.

4.

Keep disk scrapers properly adjusted.

5.

Clean planter on a regular basis. Regular and thor-
ough cleaning will lengthen equipment life and
reduce maintenance and repair.

6.

Lubricate areas listed under “Lubrication and
Scheduled Maintenance
” on page 113.

7.

Replace any worn, damaged, or illegible safety
labels by obtaining new labels from your Great
Plains dealer.