beautypg.com

Gps receivers, Aggps 162, Aggps 262 – Great Plains YP3025A Operator Manual User Manual

Page 136: Row-pro™ servo down-force

background image

132

YP3025A

Table of Contents

Index

Great Plains Manufacturing, Inc.

401-705M

Table of Contents

Index

02/16/2012

GPS Receivers
See

www.trimble.com

for complete GPS receiver specifi-

cation and other technical data.

AgGPS 162
This is a GPS L1 receiver with SABS augmentation
(WAAS, EGNOS or MSAS). It provides

±8-12in pass-to-

pass DGPS accuracy, at 1, 5 or 10Hz position update
rates. 467980458 cable on page 131 provides interface.
Mount is magnetic or one

5

8

in bolt.

This economy receiver may be preferred where auto-
steer and Swath Command™ are not installed.

AgGPS 262
This is a GPS L1 and L2 receiver with C/A code and car-
rier phase measurement, L-band DGPS. It provide pass
accuracies of:

±1in RTK (requires AgGPS 900 radio for corrections)

±2-4in: OmniSTAR HP

±3-5in: OmniSTAR XP

±6-8in: OmniSTAR VBS or WAAS

at 1, 5 or 10Hz position update rates. 467980458 cable
on page 131 provides interface. Mount is three 10mm
bolts.

This receiver is recommended for auto-steer and
Swath Command™ applications.

Row-Pro™ Servo Down-Force

This system actively controls the down-force at every
row, reacting to changing field conditions. Load cells
send force readings to the seed monitor. The seed moni-
tor operates valves supplying air to cylinders at each row.
The cylinders counteract the standard springs, providing
an adjustment range of +0/-60 pounds (+0/-27 kg). The
seed monitor console provides in-cab control of row
force, and continuous reporting and alerts.

Presently, the Row-Pro™ option is only available factory
installed (initial planter order feature code 60), and is not
field-installable.

Row-Pro™ is not available for single row spacings below
35cm (13.7in).

Description

Part Number

DJ TRIMBLE AG GPS 162 RECEIVER

823-351C

DJ TRIMBLE AG GPS 262 RECEIVER

823-380C

Null4:

31419

Null4:

31419

AgGPS 262

AgGPS 162

Null4:

31549