Electrical hookup, Hitching with 3-point – Great Plains YP3025A Operator Manual User Manual
Page 21

Great Plains Manufacturing, Inc.
Preparation and Setup
17
02/16/2012
401-705M
Electrical Hookup
Refer to Figure 5
Make sure tractor is shut down with accessory power off
before making connections.
1.
Mate lighting connector to tractor outlet.
2.
Mate monitor connector to tractor harness.
3.
Mate any optional or aftermarket electrical connec-
tors.
Make connections prior to planter movement. Some
planter hydraulic circuits are under monitor control.
Null4:
Hitching with 3-Point
If the planter is model YP3025A-2415 (“Even Row
15in”), check the configuration of the hitch offset at
“YP3025A-2415 3-Point Hitch” on page 168.
2.
Connect your tractor 3-point to the planter 3-point
hitch. If using quick hitch be sure planter locks into
hitch securely.
3.
Raise tractor 3-point enough to relieve pressure from
parking stands.
Load Sway Hazard:
Adjust 3-point hitch arms and sway blocks to minimize any
side-to-side sway to assure proper tracking in the field, and
safe road travel.
Null4:
Null4:
Figure 5
Connector Identification
25236
25237
Null4:
Figure 6
3-Point Hitch
29242