Cabletron Systems ELS10-26 - Manual (Page 90)

4-4
Bridge MIB
dot1dStpPriority {dot1dStp 2}
Integer Read-Write
The value of the write-able portion of the Bridge ID, i.e., the first
two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of
the Bridge ID are given by the value of dot1dBaseBridgeAddress.
Any value from 0 to 65535 may be specified.
dot1dStpTimeSinceTopologyChange {dot1dStp 3}
Time Ticks Read-Only
The time (in hundredths of a second) since the last time a topology
change was detected by the bridge entity.
Zero if a topology change is in progress; otherwise, the time since
the topology last stabilized.
dot1dStpTopChanges {dot1dStp 4}
Counter Read-Only
The total number of topology changes detected by this bridge since
the management entity was last reset or initialized.
dot1dStpDesignatedRoot {dot1dStp 5}
Octet String Read-Only
The bridge identifier of the root of the spanning tree as determined
by the Spanning Tree Protocol as executed by this node. This value
is used as the Root Identifier parameter in all Configuration Bridge
PDUs originated by this node.
dot1dStpRootCost {dot1dStp 6}
Integer Read-Only
The cost of the path to the root as seen from this bridge.
dot1dStpRootPort {dot1dStp 7}
Integer Read-Only
The port number of the port which offers the lowest cost path from
this bridge to the root bridge.