Cabletron Systems ELS10-26 - Manual (Page 140)

6-28
ELS10-26 MIB
• none (1) – no error; the trunking protocol may re-start with no
error conditions when trunking is turned on for a port, or when
the MIB variable that controls extra trunk groups is modified.
• in-bpdu (2) – a Spanning Tree BPDU was received, indicating
that the connection is not point-to-point, or the far end does not
have trunking turned on.
• multiple-bridges (3) – a different bridge has been connected at
the far end and the trunking protocol will re-start.
• ack-lost (4) – the far end has detected a problem, and the
trunking protocol will re-start.
• standby (5) – this trunk group is filled to capacity using other
ports; this port is now a hot standby.
• too-many-groups(6) – the maximum number of groups a
ELS10-26 can handle has been reached and a new group cannot
be added. This port will not be used until the condition clears.
• no-ack (7) – this port has not received a valid trunking packet,
and the trunking protocol will re-start.
• perturbed-threshold (8) – errors are preventing stabilization,
and the trunking protocol will re-start.
• self-connect (9) – this port is connected to another port on the
same ELS10-26 and cannot be used until this condition clears.
• port-moved (10) – a different port has been connected at the far
end, and the trunking protocol will re-start.
lxtrunkLinkOrdinal {lxtrunkEntry 6}
Integer Read-Only
The position of this link within the trunk group.