4 ip additional objects, Ip additional objects -18 – Cabletron Systems ELS10-26 User Manual
Page 44

2-18
TCP/IP MIB-II
ipNetToMediaEntry
{ipNetToMediaTable 1}
Not Accessible
A set of objects for an ipNetToMediaTable entry. The individual
components are described below.
ipNetToMediaIfIndex
{ipNetToMediaEntry 1}
Integer Read-Write
The port number for which this entry is effective.
ipNetToMediaPhysAddress
{ipNetToMediaEntry 2}
Physical Address Read-Write
The MAC address (for the PPP port, this should be a zero length
octet string; for Ethernet ports, this should be a little-endian six
byte address).
ipNetToMediaNetAddress
{ipNetToMediaEntry 3}
IP Address Read-Write
The IP address which corresponds to the ipNetToMediaPhysAddress.
ipNetToMediaType
{ipNetToMediaEntry 4}
Integer Read-Write
The type of address mapping, one of the following:
• other (1) - none of the below.
• invalid (2) - the entry should be considered to be non-existent.
• dynamic (3) - the mapping was dynamically learned.
• static (4) - the mapping was statically configured.
2.4.4 IP Additional Objects
The TCP/IP additional IP objects are described below.