Cabletron Systems ELS10-26 - Manual (Page 135)

ELS10-26 MIB
6-23
• duplex-half (2)
• duplex-full (3)
6.1.8 Cabletron UART Interface Group
lxuartTable {lxuart 1}
Not Accessible
A list of interface entries; one per UART port.
lxuartEntry {lxuartTable 1}
Not Accessible
A set of objects for an interface entry. The individual components
are described below.
lxuartIndex {lxuartEntry 1}
Integer Read-Only
The ELS10-26’s port number of the port. This is always 25.
lxuartBaud {suartEntry 2}
Integer Read-Write
This is the desired baud rate. Only 1200 baud through 19,200 baud
are supported by the ELS10-26, but the complete set of possibilities
is:
• external-clock (1)
• 1200-baud (2)
• 2400-baud (3)
• 4800-baud (4)
• 9600-baud (5)
• 19200-baud (6)