Cabletron Systems ELS10-26 - Manual (Page 102)

5-4
PPP MIB
• enabled (1) - supports protocol compression.
• disabled (2) - no support for protocol compression.
pppLinkStatusRemoteToLocalProtocolCompression
{pppLinkStatusEntry 11}
Integer Read-only
Indicates whether the remote PPP entity will use Protocol
Compression when transmitting packets to the local PPP entity.
The value of this object is meaningful only when the link has
reached the open state (ifOperStatus is up).
• enabled (1) - supports protocol compression.
• disabled (2) - no support for protocol compression.
pppLinkStatusLocalToRemoteACCompression
{pppLinkStatusEntry 12}
Integer Read-only
Indicates whether the local PPP entity will use Address and
Control Compression when transmitting packets to the remote
PPP entity. The value of this object is meaningful only when the
link has reached the open state (ifOperStatus is up).
• enabled (1) - supports ACC map compression.
• disabled (2) - no support for ACC map compression.
pppLinkStatusRemoteToLocalACCompression
{pppLinkStatusEntry 13}
Integer Read-only
Indicates whether the remote PPP entity will use address and
control compression when transmitting packets to the local PPP