Cabletron Systems ELS10-26 - Manual (Page 143)

ELS10-26 MIB
6-31
6.1.12 Cabletron Trap Management Group
This group presents the Cabletron MIB variables that are included
as varbinds with the traps generated by the ELS10-26. Chapter 7 of
this manual describes the traps generated by the ELS10-26.
lxtrapControlTable {lxtrapMgt 1}
Not Accessible
This table contains information about the severity of each trap and
whether the trap is currently enabled.
lxtrapControlEntry {lxtrapControlTable 1}
Not Accessible
The sequence of elements in the lxtrapControlTable are shown
below:
• lxtrapIndex Integer Read-Only
• lxtrapEnabled Integer Read-Write
• lxtrapSeverity Integer Read-Write
• lxtrapTex Display String Read-Only
lxtrapIndex {lxtrapControl 1}
Integer Read-Only
Identifies the specific trap number.
lxtrapEnabled {lxtrapControl 2}
Read-Write
Allows you to enable or disable the generation of this trap.
lxtrapSeverity {lxtrapControl 3}
Integer Read-Write
A user-definable severity indicating the importance of the trap.
The severity levels are defined as follows: