Cabletron Systems ELS10-26 - Manual (Page 139)

ELS10-26 MIB
6-27
lxtrunkState {lxtrunkEntry 2}
Integer Read-Only
Indicates the trunking condition for this port. Values include:
• off (1) – this link has not been enabled for trunking.
• closed (2) – this link has not yet received any PDUs.
• oneway (3) – incoming trunking PDUs do not indicate that the
ELS10-26’s PDUs are being successfully received by the far end.
• joined (4) – this link is actively participating in the trunk group.
• perturbed (5) – this link is actively participating in the trunk
group; however, the transmission of data packets has been
temporarily stopped due to a change in membership of the
trunk group.
• helddown (6) – an error has been detected and this link is being
held out of service until the error clears.
• broken (7) – this link has been configured for trunking but the
port is physically non-operational.
lxtrunkRemoteBridgeAddr {lxtrunkEntry 3}
Octet String Read-Only
The MAC address portion of the bridge ID of the remote bridge.
lxtrunkRemoteIp {lxtrunkEntry 4}
IP Address Read-Only
The IP address of the remote bridge.
lxtrunkLastError {lxtrunkEntry 5}
Integer Read-Only
The reason for failure when the link is in the held-down state.
Values include: