beautypg.com

Cabletron Systems ELS10-26 User Manual

Page 110

background image

5-12

PPP MIB

• vj-tcp(2) - the Van Jacobsen TCP/IP header compression

protocol is supported.

pppIpRemoteMaxSlotId

{pppIpEntry 4}

Integer Read-only

The Max-Slot-Id parameter that the remote node has advertised
and that is in use on the link. If vj-tcp header compression is not in
use on the link then the value of this object shall be 0. The value of
this object is meaningful only when the link has reached the open
state (pppIpOperStatus is opened).

pppIpLocalMaxSlotId

{pppIpEntry 5}

Integer Read-only

The Max-Slot-Id parameter that the local node has advertised and
that is in use on the link. If vj-tcp header compression is not in use
on the link then the value of this object shall be 0. The value of this
object is meaningful only when the link has reached the open state
(pppIpOperStatus is opened).

pppIpConfigTable

{pppIp 2}

Not-Accessible

Table containing configuration variables for the IPCP for the local
PPP entity.

pppIpConfigEntry

{pppIpConfigTable 1}

Not-Accessible

IPCP information for a particular PPP link.

pppIpConfigAdminStatus

{pppIpConfigEntry 1}

Integer Read-Write

The immediate desired status of the IP network protocol. Setting
this object to open (1) will inject an administrative open event into
the IP network protocol’s finite state machine. Setting this object to
close (2) will inject an administrative close event into the IP