Cabletron Systems ELS10-26 - Manual (Page 77)

TCP/IP MIB-II
2-51
STATUS mandatory
DESCRIPTION The administrative state of the Com
Port.
{ctCpEntry 4}
The SNMP group. Implementation of this group is mandatory
when the SNMPv2 protocol is present within the device.
enableSNMPv1
OBJECT-TYPE
SYNTAXINTEGER {disable (1), enable (2)}
ACCESS read-write
STATUS mandatory
DESCRIPTION This object allows control over the
SNMPv1 protocol. If set to a value of
disable (1) then the SNMPv1 proto-
col will not be accepted by the
device.
{ctSNMP 1}
enableSNMPv2
OBJECT-TYPE
SYNTAXINTEGER {disable (1), enable (2)}
ACCESS read-write
STATUS mandatory
DESCRIPTION This object allows control over the
SNMPv2 protocol. If set to a value of
disable (1) then the SNMPv2 proto-
col will not be accepted by the
device.