Cabletron Systems ELS10-26 - Manual (Page 127)

ELS10-26 MIB
6-15
lxaddrOperation {lxaddr 8}
Integer Read-Write
The operation to be performed upon the described address. The
possibilities include:
• read-random (1)
• read-next (2)
• update (4)
• delete (5)
• read-block (6)
lxaddrIndex {lxaddr 9}
Integer Read-Write
The index number to be used for read-next and read-block
operations. When the ELS10-26 boots, lxaddrIndex is initialized
to -1
lxaddrNext {lxaddr 10}
Integer Write-Ignore
The next value to use for lxaddrIndex, when you use read-next or
read-block operations to read the address table. When the
ELS10-26 boots, lxaddrNext is initialized to -1.
lxaddrBlockSize {lxaddr 19}
Integer Write-Ignore
The number of addresses contained by lxaddrBlock, defined
below. This parameter is only used for dumping blocks of MAC
addresses.
lxaddrBlock {lxaddr 20}
Octet String Write-Ignore
A series of 0-700 octets, which represents 0-100 addresses. Each
address consists of a 6 octet MAC Address followed by a 1 byte