Cabletron Systems ELS10-26 - Manual (Page 83)

Ethernet MIB
3-3
dot3StatsTable {dot3 2}
Not Accessible
A list of interface entries; one per Ethernet port, which correspond
to the dot3Table entries.
dot3StatsEntry {dot3StatsTable 1}
Not Accessible
A set of statistics for an Ethernet entry. The individual components
are described below.
dot3StatsIndex {dot3StatsEntry 1}
Integer Read-Only
The ELS10-26’s Ethernet port number.
dot3StatsAlignmentErrors {dot3StatsEntry 2}
Counter Read-Only
Number of received packets with frame alignment errors since the
port was last enabled.
dot3StatsFCSErrors {dot3StatsEntry 3}
Counter Read-Only
Number of received packets with FCS errors (and without frame
alignment errors) since the port was last enabled.
dot3StatsSingleCollisionFrames {dot3StatsEntry 4}
Counter Read-Only
The number of frames that experienced a single collision.
dot3StatsMultipleCollisionFrames {dot3StatsEntry 5}
Counter Read-Only
The number of successfully transmitted frames that experienced
more than one collision.