Cabletron Systems ELS10-26 - Manual (Page 11)

1-1
CHAPTER 1
INTRODUCTION
This manual is for system administrators responsible for
configuring, monitoring, and maintaining the ELS10-26. Much of
the configuration of the ELS10-26 needs to be done using an
SNMP-based network management station. This manual contains
the SNMP MIB variables you may need to configure, monitor, and
manage your ELS10-26. You should use this manual with the
ELS10-26 User Guide and with the documentation provided with
your NMS.
The contents of each chapter are described below.
• Chapter 1, Introduction , provides an overview of the SNMP
primitives, describes the functions the MIB variables can be used
to perform, and describes how to use TFTP to download the
ELS10-26 system software.
• Chapter 2, TCP/IP MIB-II , describes the standard TCP/IP MIB
variables.
• Chapter 3, Ethernet MIB , describes the standard Ethernet MIB
variables.
• Chapter 4, Bridge MIB , describes the Bridge MIB variables.
• Chapter 5, PPP MIB , describes the PPP link control and IP table
MIB variables.
• Chapter 6, ELS10-26 MIB , describes the Cabletron enterprise
MIB variables.
• Chapter 7, Traps , describes generic and enterprise-specific
traps.