Cabletron Systems ELS10-26 - Manual (Page 34)

2-8
TCP/IP MIB-II
ifOutQLen {ifEntry 21}
Gauge Read-Only
The maximum length ever obtained by the port’s outbound packet
queue (in packets) is not available, so this value is always one.
ifSpecific {ifEntry 22}
Object Identifier Read-Only
The object identifier of the MIB for the type of port, i.e., one of the
following:
{dot3} for Ethernet ports (dot3 is defined
later, as {transmission 7}).
{ppp} for the UART (ppp is defined later, as
{experimental 18}).
2.3 ADDRESS TRANSLATION GROUP
at {mib-2 3}
The TCP/IP Address Translation Group parameters are minimally
supported (i.e., for any parameter in this group, the ELS10-26
returns a GetResponse with a noSuchName ErrorStatus). It is
anticipated that the Address Translation Group will be deleted
from TCP/IP MIB III, since there will be separate address
translation tables for every type of network protocol (indeed,
TCP/IP MIB II already defines the IP Address Translation Table).
The TCP/IP Address Translation Group parameters are described
below.