Cabletron Systems ELS10-26 - Manual (Page 43)

TCP/IP MIB-II
2-17
ipRouteInfo {ipRouteEntry 13}
Object Identifier Read-Write
A reference to additional MIB definitions, specific to the routing
protocol which is responsible for this route. This information is not
present in the ELS10-26, so ipRouteInfo should be set to the object
identifier {0 0}.
2.4.3 IP Address Translation Table
The TCP/IP IP address translation table contains mappings of
Internet addresses to MAC addresses, except for the Internet
addresses of the ELS10-26 itself. The parameters are Read/Write,
according to TCP/IP MIB-II; however, the ELS10-26 has the
restriction that a dynamic entry should not be modified, except to
be made “invalid” (any other modifications will cause a static
entry to be created). When adding a row, the following defaults are
used:
• ipNetToMediaIfIndex is obtained from the row’s instance
identifier.
• ipNetToMediaPhysAddress defaults to 0.
• ipNetToMediaNetAddress is obtained from the row’s instance
identifier.
• ipNetToMediaType defaults to “static”.
Parameters include the following:
ipNetToMediaTable {ip 22}
Not Accessible
A list of IP address translation entries; one per port number and IP
address.