Cabletron Systems ELS10-26 User Manual
Page 134
6-22
ELS10-26 MIB
lxdot3TxBabbles
{lxdot3Entry 8}
Counter Read-Only
4
Counter indicating the number of packets transmitted with babble
errors.
lxdot3TxCollisions
{lxdot3Entry 9}
Counter Read-Only
Counter indicating the total number of transmit collisions.
lxdot3SpeedSelection
{lxdot3Entry 13}
Integer Read-Write
Speed may only be selected for the Fast Ethernet Ports. In addition,
the speed -10 mbit option (2) may only be selected for Fast
Ethernet copper ports.
The returned value reflects what has been selected, not the actual
speed value; e.g. the port may actually be 10 or 100 Mbps, but
speed-auto will be the value returned if it was previously selected.
• speed - 10mbit (1)
• speed - 100mbit (2)
• speed - auto (3)
lxdot3DuplexSelection
{lxdot3Entry 14}
Integer Read-Write
All duplex options are valid for all 10 and 100 Mbps ports. The
returned value reflects what has been selected, not the actual
duplex value; e.g. the port may actually be in half-duplex or full
duplex mode, but duplex-auto will be the value returned if it was
previously selected.
• duplex-auto (1)
4.
These statistics are only updated if the ELS10-26 has been configured to gather
extended statistics (lxadminStatsExtended).