Great Plains YP1630F-1670 Operator Manual - Manual (Page 10)

6 YP1630F Table of Contents Index Great Plains Manufacturing, Inc.
401-832M Table of Contents Index 2012-12-27
Safety Decals
Safety Reflectors and Decals
Your implement comes equipped with all lights, safety
reflectors and decals in place. They were designed to
help you safely operate your implement.
▲ Read and follow decal directions.
▲ Keep lights in operating condition.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
▲ When ordering new parts or components, also request
corresponding safety decals.
818-055C
Slow Moving Vehicle Reflector
On the back of the planter, walkboard center;
1 total
See “Transporting” on page 31.
838-266C
Red Reflectors
On the back of fertilizer hopper frame each end,
and on the inside rear face of each light mounting bar;
4 total
To install new decals:
1. Clean the area on which the decal is to be placed.
2. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
34535
34535