Great Plains NTA2007 Operator Manual - Manual (Page 5)

2012-01-05 Table of Contents Index 166-372M
Great Plains Manufacturing, Inc. Table of Contents Index 1
Equipment Identification
This Operator manual applies to the following Great
Plains pull-type integrated air drill seeders:
See “Specifications and Capacities” on page 149 for
precise swath information.
Refer to Figure 1
For positive equipment identification
a
, consult the serial
number plate located on the left front of the cart main
frame, near the left tongue tube flange.
Note: The present manual does not apply to “HD” models
NTA607HD or NTA2007HD. See manual
166-283M for HD drills.
North American Models NTA2007
Models NTA2007 are built to North American regulatory
and highway transport standards.
Refer to Figure 2 (which is NOT from an actual machine)
The serial number plate provides the model number and
serial number specific to your machine.
See “Transporting the Air Drill” on page 42 and
“NTA2007 North America Models” on page 150 for
weights and measurements.
Export Models NTA607
Models NTA607 are built to European highway transport
standards.
If you, or the dealer, have added Options not originally
ordered with the machine, or removed Options that were
originally ordered, the weights and measurements are no
longer accurate for your machine. Update the Record on
the next page upon modifications.
See “Transporting the Air Drill” on page 42 and
“Specifications and Capacities” on page 149 for
additional weights and measurements.
NTA607-3275 6m, 32-row, 19.1cm (7.5in) spacing
NTA607-4006 6m, 40-row, 15.0cm (5.9in) spacing
NTA2007-3275 20ft, 32-row, 7.5in spacing
NTA2007-4006 20ft, 40-row, 6in spacing
a. The present manual does not apply to “HD” models NTA607HD or NTA2007HD. See manual 166-283M for HD drills.
Figure 1
Label/Plate Location
32469
1
1
Figure 2: NTA2007:
Example Serial Number Plate
32152
Figure 3: NTA607:
Example Machine Label
32234