Great Plains NTA2007 Operator Manual User Manual
Operator manual, Manufacturing, inc
Manufacturing, Inc.
© Copyright 2012
Printed 2012-01-05
166-372M
EN
ORIGINAL INSTRUCTIONS
Operator Manual
NTA607 or NTA2007
6 Meter No-Till Air Drills
Read the Operator manual entirely. When you see this symbol, the
subsequent instructions and warnings are serious - follow without
exception. Your life and the lives of others depend on it!
Illustrations may show optional equipment not supplied with standard unit, or may show
NTA607, NTA607HD, NTA2007 or NTA2007HD air drills.
32469
This manual is related to the following products:
Table of contents
Document Outline
- Operator Manual
- Table of Contents
- Equipment Identification
- Introduction
- Important Safety Information
- Look for Safety Symbol
- Be Aware of Signal Words
- Prepare for Emergencies
- Be Familiar with Safety Decals
- Wear Protective Equipment
- Use A Safety Chain
- Avoid High Pressure Fluids
- Minimize Radiation Exposure
- Handle Chemicals Properly
- Confined Space
- Tire Safety
- Use Safety Lights and Devices
- Keep Riders Off Machinery
- Transport Machinery Safely
- Shutdown and Storage
- Practice Safe Maintenance
- Safety At All Times
- Safety Decals
- Safety Reflectors and Decals
- Reflector: Slow Moving Vehicle (SMV)
- Reflectors: Red Triangles
- Reflectors: Fluorescent Panels
- Reflectors: Red
- Reflectors: Daytime
- Reflectors: Amber
- Transport: Speed
- Transport: Speed
- Transport: Warning: Clearance
- Transport: Warning: Roll-Away
- Danger: Read Manual
- Danger: Do Not Ride
- Danger: Crush (Marker)
- Danger: Electrocution
- Danger: Hitch Crushing
- Danger: Marker Crush
- Danger: Chemicals
- Danger: Chemicals (Option)
- Danger: Wing Crushing
- Danger: Wing Lock
- Danger: Marker Pinch (Option)
- Warning: Shock Hazard
- Warning: Fan Hazard
- Warning: Moving Chain
- Warning: Wear Eye Protection
- Warning: Pinch Point
- Warning: High Pressure Fluid
- Warning: Confined Space
- Warning: Moving Gears
- Warning: Pinch Point
- Warning: Falling Hazard
- Warning: Hand Pinch
- Caution: Read Operator Manual
- Caution: Radar in Use
- Caution: Tire Pressure and Torque
- Caution: Tire Pressure and Torque
- Caution: Tire Pressure and Torque
- Caution: Tires Not A Step
- Preparation and Setup
- Operating Instructions
- Pre-Start Checklist
- Unfolding and Folding
- Lowering and Raising Drill
- Transporting the Air Drill
- Brake Operation
- Ladder Operations
- Hopper and Tank Lid Operations
- Meter Doors
- Loading Hopper Materials
- Calibration Crank, Bag and Scale
- Air System Operation
- Fan Operation
- Marker Operation (Option)
- Field Operations
- Field Operation
- Parking
- Storage
- Adjustments
- Adjustments Summary
- Setting Material Rates
- Check Contact Tires
- Check Flute Shaft Type
- Find Your Chart and Rate
- Monitor Material Configuration
- GRAN SEED MONITOR GRAN FERT MONITOR
- Material Configuration Setup Screen for Dry Fertilizer
- Channel Setup Screen
- GRAN SEED CONTROL GRAN FERT CONTROL
- Example Material Library:
- Update Material Library
- Create a Controlled Material
- Example Non-Preset Material Setup:
- Actuator Channel Setup
- Example Channel Setup:
- Calibrate
- Meter Rate Adjustment
- Meter Calibration
- Planting Depth Adjustments
- Adjusting Tool Bar Height
- Air System Adjustments
- Weight Transfer Adjustments
- Frame-Mounted Coulters
- 07 Series Row Unit Adjustments
- Marker Adjustments
- Troubleshooting
- Maintenance and Lubrication
- Maintenance Lift Lock
- Hopper Strap Maintenance
- Chain Maintenance
- Fertilizer System Maintenance
- Unloading Materials
- Material Clean-Outs
- Implement Lift Switch Adjustment
- Contact Drive Re-Setting
- Hydraulic Maintenance
- Brake Maintenance (Option)
- Levelling Implement
- Marker Maintenance (Option)
- Seed Flap Replacement
- Beacon Maintenance
- Lubrication and Scheduled Maintenance
- Hopper Straps
- Wing Flex Pivots
- Marker Tilt Bearings (Option)
- Cart-Implement Link
- Rear Lower Parallel Arms
- Rear Upper Parallel Arms
- Coulter Pivots
- Fertilizer Pump Bearings (Option)
- Fertilizer Pump Crankshaft (Option)
- Tire Pressures
- Contact Drive Chains
- Drive Chains (Single-Hopper)
- Drive Chains (Dual Hopper)
- Drive Chains (w/Liquid Fertilizer, Option)
- Hopper Lid Pivot Bar and Clamps
- Meter Box Door Clamps
- Caster Pivots
- Caster Brakes
- Cart Wheel Bearings
- Gauge Wheel Bearings
- Coulter Hub Bearings
- Hopper Lid Seals
- Meter Door Seals
- Options
- Appendix A - Reference Information
- Appendix B - Initial Setup
- Appendix C - Option Installation
- Index