Great Plains NTA2007 Operator Manual - Manual (Page 150)

146 NTA607 or NTA2007 Table of Contents Index Great Plains Manufacturing, Inc.
166-372M Table of Contents Index 2012-01-05
Variable Rate Kit
The variable rate actuator kit places the material rate
under the control of the seed monitor. This allows
convenient rate setting and adjustment from the tractor
cab, as well as GPS control of rates. The manual
adjuster crank is de-coupled, and left in place.
Installation is described in the 166-263M manual
included with the kit.
See “Variable Rate (Servo) Calibration” on page 83.
Tramline
Tramline kits configure one or more row units to cease
seeding during specific passes, creating un-planted rows
for transit of equipment post-emergence. Seed intended
for an un-planted row is diverted to an adjacent row.
Kits are provided for 2 or 6 rows (6-row kit shown at
right). The seed monitor supports a maximum of 8
outputs (rows) that may be controlled. Pre-defined and
user-programmable bout patterns are available.
Markers
Hydraulically-operated swing-arm markers leave a visible
groove to use as centre-line for the next pass.
These dual markers mount on both sides, and include an
automatic sequence valve for operating alternate sides
on each pass. The kit includes an installation manual
(166-263M).
Each kit equips one drill.
See “Marker Adjustments” on page 99,
“Marker Operation (Option)” on page 62, and
“Marker Maintenance (Option)” on page 134.
Variable Rate Kit Part Numbers
Single Hopper 166-328A
Dual Hopper 166-339A
31195
Kit Description
Part
Number
3007NT / 907 TRAMLINE KT 2 ACT 168-427A
3007NT / 907 TRAMLINE KT 6 ACT 168-428A
31321
Description Part Number
MARKER, NTA2007 & NTA607 113-817A
31327