Great Plains NTA2007 Operator Manual - Manual (Page 14)

10 NTA607 or NTA2007 Table of Contents Index Great Plains Manufacturing, Inc.
166-372M Table of Contents Index 2012-01-05
Safety Decals
Safety Reflectors and Decals
Your implement comes equipped with all lights, safety
reflectors and decals in place. They were designed to
help you safely operate your implement.
▲ Read and follow decal directions.
▲ Keep lights in operating condition.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
▲ When ordering new parts or components, also request
corresponding safety decals.
To install new decals:
1. Clean the area on which the decal is to be placed.
2. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
Reflector: Slow Moving Vehicle (SMV)
At centre of rear caster sub-frame cross-tube;
1 total
See “Transport Safety Information” on page 42.
Reflectors: Red Triangles
One each rear fluorescent panel;
2 total
See “Transport Safety Information” on page 42.
NTA607: n/a
(International models use
833-398C panels and
833-399C reflectors)
NTA2007: 818-055C
31286
NTA607: 833-399C NTA2007: n/a
(North American models
use
818-055C SMV reflectors,
838-266C red reflectors &
838-267C amber reflectors.)
32466