Nta2007 north america models – Great Plains NTA2007 Operator Manual User Manual
Page 154
150
NTA607 or NTA2007
Great Plains Manufacturing, Inc.
166-372M
2012-01-05
NTA2007 North America Models
See page 43 for weights of representative configurations.
NTA2007-3275
NTA2007-4006
Number of Openers
32
40
Row Spacing (Nominal)
7.5 inches (19.1 cm)
15 cm (6.0 inches)
Wing Flex
Standard: 10° Down; Unlimited Up
Standard: 10° Down; Unlimited Up
Limited: 2.5° Down; Unlimited Up
Limited: 2.5° Down; Unlimited Up
Spacing at Wing Gaps
Standard: 21.6 cm (8.5 inches)
Standard: 21.6 cm (8.5 inches)
Limited: 19.1 cm (7.5 inches)
Limited: 15.2 cm (6.0 inches)
Span¹
Standard: 595.6 cm (234.5 inches)
Standard: 607.1 cm (239.0 inches)
Limited: 590.6 cm (232.5 inches)
Limited: 594.4 cm (234.0 inches)
Swath²
Standard: 614.7 cm (242.0 inches)
Standard: 622.3 cm (245.0 inches)
Limited: 609.6 cm (240.0 inches)
Limited: 609.6 cm (240.0 inches)
Swath-Averaged
Standard: 19.2 cm (7.56 inches)
Standard: 15.6 cm (6.13 inches)
Row Spacing² ³
Limited: 19.1 cm (7.5 inches)
Limited: 15.2 cm (6.0 inches)
Hopper Capacities
Single 150 bu. (5290 liter) or
Single or Dual 82 bu. (2890 liter)
Tank Capacities (Option)
Dual 200 gal. (760 liter)
Total:
400 gal. (1510 liter)
Tractor Power Required
170 hp (130 kw)
170 hp (130 kw)
Hydraulic Circuits
3 Closed Center, 2,250 psi (155 bar), 25 gpm (95 liters/min)
Working Width
20ft 0in (6.10 m)
20ft 0in (6.10 m)
Transport Width
9ft 9in (2.97 m)
Transport Length
29ft 9in (9.07 m)
Working Length
31ft 7in (9.63 m)
Transport Height
13ft 0in (3.96 m)
Working Height
10ft 4in (3.15 m)
Hitch Load in Transport
1,100 to 3,500 lbs (500 to 1590kg)
Hitch to Opener Distance
280.0in (711.2 m)
Opener Travel
+7 to -2 in. (+18 to -5cm)
Opener Depth Range
0 to 4 in. (0 to 10cm)
397 to 551 lbs. (180 to 250 kg)
Weight Range
22,500 to 33,500 lbs. (10 200 - 15 200 kg) 23,900 to 34,900 lbs. (10 800 to 15 800 kg)
Tire Sizes
Cart(2): 23.5/55-26 12-Ply R1
Implement(4): 265/70B16.5 HS 8-Ply Skid Steer
Contact Drive(1): 20x8.00-10 NHS 4-Ply Turf
¹ Dimension across implement between end row center-lines.
² Assumes bout / pass gap is one nominal row space.
Coulter Down Pressure
³ Effective row spacing for Standard Down-Flex. Same as “Row Spacing” for Limited Down-Flex.