Options, Variable rate kit, High rate flute sets – Great Plains NTA2007HD Operator Manual User Manual
Page 145

Great Plains Manufacturing, Inc.
141
04/04/2011
166-283M
Options
Variable Rate Kit
The variable rate actuator kit places the material rate
under the control of the seed monitor. This allows conve-
nient rate setting and adjustment from the tractor cab, as
well as GPS control of rates. The manual adjuster crank
is de-coupled, and left in place.
Installation is described in the 166-263M manual
included with the kit.
See “Variable Rate (Servo) Calibration” on page 78.
Null4:
High Rate Flute Sets
The standard NTA607/2007HD Drill meter has two fluted
wheels (“stars”) and two filler rings in each meter com-
partment.
If your seeding rates need to be higher than those listed
in the Seed Rate manual, these accessories replace the
existing shaft assembly with one having more stars. See
“Changing Meter Flutes” on page 163 for installation
instructions.
Replacing the standard 2-star shafts
with 3-star
shafts
increases the seeding rate by approximately
50% (150% of standard rate). Replacing standard 2-star
shafts with 4-star shafts
increases the seeding rate by
approximately double (200% of standard rate).
The kit required depends on the number of stars desired.
Order one kit per meter (two per drill if changing both
meters)
Null4:
Variable Rate Kit
Part Numbers
Single Hopper
166-328A
Dual Hopper
166-339A
Null4:
31195
Stars per Outlet
Part
Numbers
3 Stars per outlet
168-320S
4 Stars per outlet
168-321S
Null4:
31261
3
4
2
2
3
4
3
4