SARGENT Profile Series v.G1.5 Mortise Locks - Manual (Page 2)

Table of Contents
Page
For installation assistance, contact SARGENT at 800-810-WIRE (9473)
Important
• The Profile v.G1.5 Series provides enhanced software and hardware features
• The v.G1.5 controllers replace v.G1 controllers. Product is still ordered as "G1-" prefix.
Dorm lock controllers are labeled "G1.5 Dorm"
• Dorm room application for students using proximity cards and/or pin codes
• Factory-configured v.G1.5 controller for Dorm application required
Warning .............................................................................................................1
General Description ...............................................................................................1
Specifications ......................................................................................................1
Features .............................................................................................................1
Parts Breakdown ................................................................................................2-3
Installation Instructions (Verify Hand and Bevel of Door)...................................................4
6.1 – Door Preparation .......................................................................................4
6.2 – How to Reverse Lock Hand ...........................................................................5
6.3 – Lockbody Installation ..................................................................................6
6.4 – Fire Stop Plate Installation ...........................................................................6
6.5 – Installation of Outside Escutcheon Assembly .....................................................7
6.6 – Installation of Inside Escutcheon Assembly .......................................................7
6.7 – Installation of Inside Monitor Switch ...............................................................8
6.8 – Hardwiring Options
6.8.A – Important ...........................................................................................8
6.8.B – Installation Notes .................................................................................8
6.8.C – ElectroLynx Connector System ..................................................................8
6.8.D – Forced/Propped Door Option (DM-) ............................................................9
6.8.E – Hard Power & (91-) with Forced/Propped Door (DM-) .....................................11
6.9 – Attaching Inside Escutcheon & Lever..............................................................12
6.10 – Installation of Cylinder .............................................................................12
6.11 – Battery Installation/Attaching Outside Front ....................................................13
Operational Check................................................................................................14
Keypad Programming Instructions ........................................................................14-18
1
2
3
4
5
6
7
8
© SARGENT Manufacturing Company 2006, 2007