SARGENT DL Series Tubular Lock - Manual

1. Lever (2) 8. Faceplate
2. Set screw (2) 9. Screws-latch & strike (4) # 8-32 x 3/4"
3. Rose 10. Strike
4. Mounting post (2) 11. Strike box
5. Spring housing (2) 12. Push button (1) 65 function only.
6. Lever Springs (2) 13. Fire Clip
7. Latch 14. Screws - Lockbody (2) #8 x 3/4"
1
• Hollow Metal Doors should be properly reinforced for lock support. If support is not provided, contact door manufacturer.
• For all metal door preparations, use 7 line template (A7240) for reference
• For all wood door preparations, use template A6719 (Except for functions DLU93 / DLU94 which uses template A7931)
• Mark and Drill Holes • Final Door Prep • Frame Prep for Strike
Door Preparation
1
2
3
4
5
6
7
8
9
13
11
5
3 14
1
6
2
10
INSTALLATION INSTRUCTIONS
DL LINE LEVER LOCK
(Patents Pending)
For installation assistance, contact SARGENT at 800-727-5477 • www.sargentlock.com
Copyright © 2008, 2009, 2012, Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written permission of
Sargent Manufacturing Company is prohibited.
A7858E 07-19-12
12 Tools
#2 Phillips screwdriver
1/8" Hex Wrench
1/8" drill bit
2-1/8" bore
1" bore