SARGENT Profile Series v.G1.5 Mortise Locks - Manual (Page 18)

Keypad Programming Instructions
Enter a Card, Tag and Fob User
99# Master Code* Yellow LED blinks
50# Yellow LED blinks
(Select only one number below, end it with a #, ie 4#)
0= Passage Code; 1= Standard User; 3= Lockout Code; 4= Extended Unlock User; 5= One Time User; 7= Emergency
Code; 8= Communications Enable; 9= Panic User
(Yellow LED blinks)
(User Number 03-2000)# Yellow LED blinks
* Yellow LED blinks Quickly
* Yellow LED blinks Slowly (if Solid See Note)
Present Card, Tag or Fob Beep / Yellow LED blinks
* Yellow LED blinks Slowly
* Yellow LED Goes Out
Enter a User Code + Card, Tag, and Fob
99# Master Code* Yellow LED blinks
50# 1# (User Number 03-2000)# Yellow LED blinks
User Code (1-6 digits)* Yellow LED blinks quickly
User Code (1-6 digits)* Yellow LED blinks slowly (If solid, see note)
Present Card, Tag or Fob BEEP / Yellow LED blinks
* Yellow LED blinks slowly
* Yellow LED goes out
Reset Master Code back to factory default (1234) and retain all other User codes
99# Master Code* Yellow LED blinks
40# 00000# 00000# Yellow LED blinks
* Yellow LED blinks quickly
* Yellow LED blinks very fast for 10 sec., then slow
* Yellow LED goes out
Note: The factory default Master Code (1234) must be changed (i.e., “Forced Change”) prior to adding
any other users.
To Clear the Entire Memory (Master Code defaults to 1234)
99# Master Code* Yellow LED blinks
46# 00000# 00000# Yellow LED blinks
* Yellow LED blinks quickly
* Yellow LED blinks very fast for 10 sec., then slow
* Yellow LED goes out
This deletes ALL Codes, including Master, Emergency and Supervisory. The Master Code is set back to 1234*
Sets Unlock Time to 5 seconds. If the Master Code is not known, factory assistance will be required to clear the
memory. Call 1-800-810-9473.
Note: The factory default Master Code (1234) must be changed (i.e., “Forced Change”) prior to adding any
other users.
Turn OFF Audio Beep verification on every Key Depression
99# Master Code* Yellow LED blinks
30# 0# 0# (Off) (1# = On) Yellow LED blinks
* Yellow LED blinks quickly
* Yellow LED blinks slowly (If solid, see note)
* Yellow LED goes out
Turn ON Yellow LED verification on every Key Depression
99# Master Code* Yellow LED blinks
30# 1# 1# (On) (0# = Off) Yellow LED blinks
* Yellow LED blinks quickly
* Yellow LED blinks slowly (If solid, see note)
* Yellow LED goes out
16
© SARGENT Manufacturing Company 2006, 2007
For installation assistance, contact SARGENT at 800-810-WIRE (9473)