SARGENT 7800 Knob Locks - Manual

1
INSTALLATION INSTRUCTIONS
7800 Knobs/8200 Levers Mortise Lock & 3P8225 Levers
Triad Lock with Escutcheon Trim - WT Designs
FOR INSTALLATION ASSISTANCE CALL SARGENT AT 1-800-727-5477 • www.sargentlock.com
Copyright © 2009, Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Sargent Manufacturing Company is prohibited.
A7034G
Triad Lock 3P-8225
Standard 7800/8200 Mortise Lock
25 Function Shown
See template for
hole locations of
other functions.
Triad Only - Parts List
11. Triad Lockbody and
Hook Assembly
12. Lockbody Screws (6)
(WD and MS as above)
13. Triad Front Plate
14. Front Screws (6)(as above)
14
12
13
11
Outside of Door
(Secure/Locked Side)
Outside of Door
Parts List Description
1. Inside Lever
2. Springs (2)
3. Lever/Knob Set Screw (1)
Varies by Lever design
4. Spindles (2)
5. Trim Screws (8)
(WD #6 x 3/4" oval)
(MS #6-32 x 1/2" oval)
6. Inside Escutcheon Trim
7. Thrubolt Screws (2) &
Lockwashers (2)(#8-32 x 5/8")
8. Adapter & Plate Assembly
A) Adapter
B) Mounting Plate
C) Washer (2)
D) Retaining Nut
9. Outside Escutcheon Trim
A) Lever
B) Escutcheon
C) Thrubolt Posts (2)
D) Mounting Plate
E) Washer (2)
F) Retaining Nut
10. Cylinder
11. Lockbody
12. Lockbody Screws (2)
(#12 x 1 1/4" WD)
(#12 -24 x 1/2" MS)
13. Front Plate
14. Front Screws (2)
(#8 -32 x 1/4")
15. Thumb Turn Tail Piece —
Optional per function
Tools Required
Phillips Screwdriver (standard size)
1/8" Allen Wrench
If knobs are used instead of lever
installation is the same.
Inside of Door
NOTE:
For Triad door prep,
reference Template #4511