SARGENT 11 Line Lever Lock - Manual

1
5
6
7
9
8
10
12
11
2
3
4
15
13
14
3
2
4
INSTALLATION INSTRUCTIONS FOR
11 Line U.S. Patent No. 6,626,018
Item Description Qty.
1 Inside Lever 1
2 6 Lobe Security Set Screw, 2
1/4-28 x 11/64" 2
3 Rose 2
4 Rosette 2
5 Inner Collar 1
6 Inner Sleeve 1
7 Bearing Assembly 1
8 Aligning Pin 1
9 Outer Sleeve (with captive Collar) 1
10 Cylinder 1
11 Outside Lever 2
12 Keys 1
13 Latch Assembly 4
14 Screw, Flat Hd, #8-32 x 3/4" 1
15 Strike (800 shown)
To view helpful video installation tips, scan the Microsoft ® Tags with
your mobile phone. Download the free mobile app at http://gettag.mobi.
Code Latchbolt Functions
A 15
B 04, 05, 13, 15-3, 16, 17, 30, 37, 38
C 65
D 44, 50, 54
K 24
LATCHBOLTS ARE NOT INTERCHANGEABLE.
Code stamp
location
NOTE– CONSULT FACTORY FOR
CORRECT TEMPLATE INFORMATION
FOR 11G93, 11G94 AND 11G94-2
FUNCTIONS
FOR ASSISTANCE, CONTACT SARGENT AT 800-727-5477 or www.sargentlock.com
Copyright © 2013 SARGENT Manufacturing. All rights
reserved. Reproduction in whole or in part without
the express written permission of SARGENT
Manufacturing is prohibited.
A7469K
2" (51mm)
1-3/4" 44mm)
Mark for 1" hole (25mm) at center of door thickness
2-3/4" (70 mm)
BACKSE
T
3-3/4" (95 mm)
BACKSE
T
5" (127 mm) BACKSE
T
FOLD HERE
IMPORT
ANT
Place fold on HIGH EDGE of beveled door
Mark center for 2-1/8" crossbor
e
hole at correct backset
IMPORT
ANT
2 x 5/32" (4 mm) Dia
2-1/8" (54 mm) Diameter
2-1/4" (57mm)
Mark for
1" hole
at center of door thickness
FOLD HERE
IMPORT
ANT
Place fold on HIGH EDGE of beveled door
Mark center for 2-1/8" crossbor
e
hole at correct backset
IMPORT
ANT
2"
1-3/4"
2-3/4" (70 mm) BACKSE
T
3-3/4" (95 mm) BACKSE
T
5" (127 mm) BACKSE
T