SARGENT Profile Series v.G1.5 Exit Devices - Manual

Catalog Number: ES-G1
Specifications/Requirements
Mechanical: Electrical:
2.74" W x 4.6" L x 1.4" H Operating Voltage: 12VDC
Current Draw: 20mA
Environmental: Software:
For indoor use only SofLink Plus version 5
Temperature Tolerance: -20º to 130º F (or higher)
PC:
Serial COM port (required)
Description
The Enrollment Station is used to enroll HID 125 kHz Wiegand format (up to 40 bit) proximity cards directly into the
SofLink Plus PC software by presentation. This provides a convenient way to enroll cards whether you know the
card format or not. The raw card data is read from the card and then stored in the SofLink Plus database.
Packing List
1 Enrollment Station
1 Installation Instructions
1 12VDC, 300mA Transformer
1 6-foot straight cord
1 DB-9 Serial Connector
1 DB-25 Serial Connector 15.21 Information to User
Any changes or modifications not
expressly approved by the party
responsible for compliance could
void the user’s authority to operate
the equipment.
Proximity Card Enrollment Station
Installation Instructions
Copyright © 2009, Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Sargent Manufacturing Company is prohibited.
A7839A