Mounting dimensions, Preparation – Tweco 400 Ultra-Cut(October 2014) User Manual
Page 43
![background image](/manuals/595211/43/background.png)
ULTRA-CUT 100 XT/200 XT/300 XT/400 XT
Manual 0-5264
INSTALLATION
3-17
Mounting Dimensions
NOTE
Height not shown is 14.125” (359 mm)
Art # A-07962
8.50”
215.90mm
0.28”
7.14mm
11.00”
279.40mm
16.18”
410.97mm
13.68”
347.47mm
Gas Box
NOTE
The unit must be mounted so that the Flowmeters are plumb. If the Flowmeters are not plumb, incorrect flow
indications may occur.
Preparation
1. Remove the screws securing the Cover Panel to the Module.
2. Carefully remove the cover from the module noting the attached ground wire. Remove the ground wire if
needed.
Art # A-06882
Gas Control Module Cover
Do not remove
Remove Ground
Wire
Cover Removal
This manual is related to the following products: