Tweco 15XC CE Merlin PAK - Manual (Page 31)

Manual 0-2529 2 - 9 INSTALLATION
Figure 2-F Coolant Reservior and De-ionizing Cartridge
Refer to Figure 2-F and:
1. Locate the coolant de-ionizing cartridge and remove
from the plastic shipping bag.
2. Remove the plastic cover from the coolant reservoir
filler.
3. Place the de-ionizing cartridge into the basket in the
coolant reservoir.
4. Fill the reservoir to the line marked FULL on the rear
panel.
Use only Thermal Arc torch coolant. Use of any other
coolant can result in torch damage, insufficient thermal
protection, and/or pilot arc interference.
The deionizer cartridge should be checked periodically.
The contents of the cartridge take on a light straw-colored
appearance when spent. Replace the cartridge when the
material has completely changed color.
Coolant Installation
2.6 COOLANT INSTALLATION
CAUTION
Coolant Reservoir
Filler Cap
Deionizer
Bag
Basket
Coolant Level Indicator
A-00872