Nforce led interior lightbar, Top view with cover on, Bottom view – SoundOff Signal nFORCE Interior User Manual
Page 2: Top view with cover off, Rear front
IMPORTANT INFORMATION:
Warning devices are strictly regulated and governed by Federal, State and Municipal ordinances. These devices shall be used ONLY on approved vehicles. It is the sole responsibility of the user of these devices to ensure compliance.
To review our Limited Warranty Statement & Return Policy for this or any SoundOff Signal product, visit our website at
www.soundoffsignal.com/sales-support.
If you have questions regarding this product, contact
Technical Services, Monday - Friday, 8 a.m. to 5 p.m. at 1.800338.7337 (press #4 to skip the automated message).
Questions or comments that do not require immediate attention may be emailed to
SUPERIOR CUSTOMER RELATIONSHIPS. SMARTLY DESIGNED LIGHTING & ELECTRONIC SOLUTIONS.
nFORCE LED Interior Lightbar
ENFWBF(xx)0(x) 5.14
POWER SPECIFICATIONS
Input Voltage Range:
10 -16 Vdc
Light Bar
Component
Current Draw
(Average = Flashing)
Power Consumption
(Watts)
Standby Current
Ignition ON
Ignition OFF
Ignition ON
Ignition OFF
0.010 Amps
0.002 Amps 0.13 Watts
0.03 Watts
Reverse Polarity
Protected
Load Dump
Protected
Wiring
Power Cable 25ft 18 AWG Wires, (+) Red, (-) Black,
(Data) White
TECHNICAL SPECIFICATIONS
Material:
Powder Coated Sheet Steel
Operating Temperature:
-40º to +85º C
2.
TOP VIEW WITH COVER ON
REAR
FRONT
BOTTOM VIEW
REAR
FRONT
TOP VIEW WITH COVER OFF
REAR
FRONT