Checking mfp settings, Switching on mfp, Printing system report – Sindoh M612 User Manual
Page 64: Checking mfp settings -34, Switching on mfp -34, Printing system report -34
Preparation for Using the Machine
1-
34
15. Checking MFP Settings
Switching on MFP
1
Connect the end of the power cord to the port on the rear side of the machine and plug the power cord to
the properly grounded wall outlet.
2
Switch on the machine.
When initial warm-up is completed, [Select the function to use] message appears to indicate that the machine
is ready to receive data. If other message than [Select the function to use] appears.
P. 5-17 「Understanding MFP Messages」
3
Check your PC and make sure that other peripheral equipments are on.
4
Move to the next step.
Printing System Report
You can print the system reports to see initial settings and check if all options are properly installed.
1
Make sure the machine is on.
2
Check the tray and the paper type.
3
Press [Settings] button.