Sindoh M612 - Manual (Page 186)

Settings and changes of each function and additional functions
4-
44
Report Print Set
You can print Tx/Rx report with the number of faxed pages, communication mode and others.
Manual Printing
1 You can print Rx/Tx Report through [Settings] [General Settings] [Report] [Tx/Rx Report].
Automatic Printing
You can automatically print the Tx/Rx report according to your settings.
1 You can set automatic print through [Settings] [FAX Settings] [Report] [Report Print].
2 Press button to set your settings.
3 Press the 【Save】 button to apply the setting.
Always On The report is printed after any communication event occurs.
On Error The report is printed only with the machine failure or communication error.
Only Tx The report is printed only when Tx event occurs.
Only Rx The report is printed only when Rx event occurs.
OFF Automatic report is not available with this selection.