Sindoh M612 User Manual

Page 40

Preparation for Using the Machine

Buttons

Functions

Press 【】 button to start the operation currently set.

The job currently set starts.
Delete the messages(error messages or so) on the display panel.
Try again after removing the jammed paper.

Press 【】 button to cancel either one of the current jobs - [Printing], [Scanning]
or [Copying] mode.

【】

Press 【】 button to switch to the standby window from menu settings.

【】

Press [ ] button to activate the power saving or maximum power saveing
mode,

and return to the preparation mode if it is in one of power saving mode.
Short press: Power saving mode

Long press(over 2 seconds): Maximum power saving mode.
Processing the following work, the printer power save mode is released. Press

[ ], the power button.

【

A3/11"×17"

START】

Press 【A3/11"×17" START】 button to copy A3/11"×17" or fax A3/11"×17" paper

based on the current function selected. By default, press 【A3/11"×17" START】

button to copy A3/11"×17" paper.

【

PAUSE/REDIAL】 This button works as [PAUSE] function while entering recipient`s FAX numbers

and works as [REDIAL] without any number entered, and you can select any

number from the latest 10 recipient number list.

【

ON-Hook】

Use this button in both transmissions or receptions to dial at [On-Hook] mode

when making a call to a receiver for sending [FAX].

【

RESET】

Used when initializing the settings to the default values.

【

LOGOUT】

Used when logging out the machine after completing the jobs..

【

PROGRAM】

The settings frequently used such as copy, scan, fax functions can be stored in
the memory and later called for the quick use.