Understanding of mfp messages, Understanding of mfp messages -17 – Sindoh M612 User Manual
Page 243

5-
17
Maintenance and Troubleshooting
5
5. Understanding of MFP Messages
The LCD of the control panel is designed to display the current status and problems. This section describes
messages and how to respond them.
Messages
Meanings
Actions
Invalid Cartridge
No or unsupported cartridge
Reinstall the cartridge. If this message
appears again, replace the cartridge..
Cover Open
The front cover is open.
Close the cover.
[Copy, Scan, Fax]
Cancel Job
This message appears when press-
ing 【 】 or cancel the job in Job
Manager window while copying,
scanning or faxing.
Toner Low
The toner is low
Shake the cartridge to use the remain-
ing toner. Replace the cartridge.
Reference
- If you don’t replace the cartridge,
quality problems can occur. Also,
the machine will stop after printing
a few more sheets.
Replace Toner Car-
tridge
The toner cartridge reaches its life
and should be replaced..
Replace the cartridge with a new one..
Tray Empty
No paper in the designated tray
Load paper in the designated tray.
No Paper:
All Trays
No paper in tray (1-3. Tray, Manual
Tray)
Load paper on Tray
Paper Jam
Paper not fed from
[Tray]
Paper not supplied from Tray(1-3,
Tray, Manual Tray)
Check the paper is in the tray and set
well.
Paper Jam
Paper stops before out-
put tray
Paper jammed inside the machine
Open the front cover and pull out
the cartridge, and then remove the
jammed paper in the paper path.