Sindoh M612 - Manual (Page 180)

Settings and changes of each function and additional functions
4-
38
Auto Redial
Number of Auto Redial
As many number as set here, the machine can retry to send the fax if it is not sent properly because the re-
ceiver’s fax is busy or has any problems.
1 You can decide the number of redial through [Settings] [Fax Settings] [Tx Settings] [Auto.
Redial] [No. of Retry].
2 Touch ◀ or ▶ button to select the number of redial.
- For the number of redial, 0-5 are available and the default value is 2.
3 Press 【Save】 button to save the number for the redial.
Interval of Auto Redial
You can specify the interval time for Auto Redial.
1 You can select an interval time of redial through [Settings] [Fax Settings] [Tx Settings] [Auto.
Redial] [Retry interval].
2 Touch ◀ or ▶ to select the interval of redial.
- For the interval of redial, 1-5 (minutes) are available and the default value is 2.
3 Press Save button to save the interval of redial.
TTI
You can decide whether to place sender`s information(name and FAX no.) to the upper side of the documents
to fax.
1 You can select whether to use TTI through [Settings] [Fax Settings] [General] [TTI].
2 Press 【▲】 or 【▼】 to select TTI On or Off. (Default: On)
3 Press 【Save】 to apply TTI setting.
The following are included in TTI
[Date: YYYY-MM-DD] [Time: HH : mm] [Station ID] [Station Number] [Page: N(current) of M(total)]
Time is 24 hours system. In case of On-Hook transmission, the page is indicated as [Page: N(current).