Sindoh M612 - Manual (Page 262)

Maintenance and Troubleshooting
5-
36
Cannot Send the Fax
Status Check Point Solution Reference Page
Cannot send the
fax. Check if the transmission
method is correct. Check the transmission
method and retry.
P. 3-43, 3-46
Check if the receiver’s
number is correct. If you use the speed dial,
print the list and check if
the number is correct.
P. 3-44
Check if the error message
is displayed. Take steps related to the
error message.
-
Check if the external line
number is included. Include the external line num-
ber if you dial from the inter-
nal line.
P. 3-45
Check if the receiver’s
fax has no problem. Request the receiver to
have his/her fax ready
(power, paper).
-
Check the receiver`s
number Dial the correct number
P. 3-44
Check the receiver`s line
is busy. Wait for the call hung up.
-
Manual Tx Disabled. Press [On-Hook] button
and check if it sounds
dial tone.
Connect line correctly
P. 3-48
Document scan dis-
abled with memory
Tx function Check the document is
placed properly Place the document prop-
erly
-
Check the memory is
enough Check the memory
-