Banner SureCross DX80 Wireless Networks - Manual (Page 48)

48
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
SureCross Wireless Network
Product Manual
System Layouts
Modbus/TCP and EtherNet/IP™
Industrial Ethernet
Connection
Modbus TCP or
EtherNet IP
Host Connected - DX80 GatewayPro
Connect a DX80 GatewayPro to a host system using the industrial Ethernet connection on the DX80 GatewayPro. To connect the DX80
GatewayPro directly to the host system, use a crossover cable. By default, the DX80 GatewayPro is a Modbus/TCP or EtherNet/IP™ server. To
configure the GatewayPro as a Modbus client device, change the configuration using the configuration Web pages.
Item Model No. Description
1 DX80P**6S GatewayPro, Protocol Converter or Adv Config or CoDeSys*
2 BWA-EX2M Ethernet Cable, M12 Industrial / RJ45, Crossover, 2 m
3 DX80N... FlexPower Nodes or Nodes
4 BWA-E2M Ethernet Cable, M12 Industrial / RJ45, Straight, 2 m
* If I/O is needed on the GatewayPro, use DX85 Remote I/O devices similar to a previous configuration.
1
3
2
Host System
(e.g. Modbus Master)
Host System
(e.g. Modbus Master)
3
3
1
4
1