Banner SureCross DX80 Wireless Networks - Manual (Page 45)

45
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
SureCross Wireless Network
Product Manual
System Layouts
Modbus RTU
Modbus RTU
Host System
(e.g. Modbus Master)
Modbus RTU Host Controlled Operation
A simple host-connected system uses an RS485 serial cable to connect the DX80 Gateway device to a host system. The host system may
be a PC or a PLC unit. Because the serial cable is used to connect to a host system, the communications protocol used is Modbus RTU. The
wireless network is a Modbus slave.
Item Model No. Description
1 DX80G... Gateway
2 CSRB-M1250M125.47M125.73 Cable, RS-485, quick disconnect, 5-pin Euro, male trunk, female branches, black*
MQDC1-5*** Cable, quick disconnect, 5-pin Euro, female, straight, lengths vary
1
2
Purpose: The wireless network collects I/O
data and sends it back to a Modbus host
system.
Modbus Slave